× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: how fast are Mod 170 comm ports
  • From: Jim Langston <jlangston@xxxxxxxxxxxxxxxx>
  • Date: Mon, 10 Jul 2000 13:27:24 -0700

I would have to disagree.  Specifically, with the term "using any method".
DSL uses two wires (www.2wire.com for example) and yet speeds can
go above T1 speeds (1.54mps or so).

At home, on 2 wires, I am running 768k/sec down, 128k/sec up.  For $50
a month.  I would say this is using two wires using any method and is definately
faster than 33.6.

Now... perhaps the article was talking about analog signals being limited to 
33.6?
They currently go faster than this using compression, but I think the actual 
signal
speed is still 19.2 or thereabouts.

Regards,

Jim Langston

Date: Mon, 10 Jul 2000 09:44:35 -0400
From: Pat Barber <mboceanside@worldnet.att.net>
Subject: Re: how fast are Mod 170 comm ports

Larry Bolhuis wrote:

> what you pay for.  Also remember the high speed is download only,
> uploads will never exceed 33.6K.

I know I'll never find it again, but a few years back some engineer
type from one of the modem companies wrote an article for either
Midrange Computing or News/400 on the physical limits of modems. As
I recall, the physical limit on two wires using any method was 33.6
which was reached by the amount of electricity you could shove through
a very thin wire. The article explained all the math equations that
prove this out.

In a large account that I did some work for, the question came up
about "just" how fast their lease lines were running. We finally
came to the conclusion that there really isn't a sure fire way to
measure through put on a comm line with any software tools.

The phone company remains the only source of this information and
I could not find a proof postive way to determine if a V.35 line
was "really" running at 512kb.

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.