Yes! The system ( F50 ) it's still up and running.
Whit one problem:
Connections via SNA Server are Ok, but...
** No Client Access Connections via TCP/IP **
When testing connection, messages received:
The IP was used to establish connection ( so far so good... )
CWBCO1003: Winsock error function connect 10061
Details says to issue:
STRHOSTSVR SERVER(*ALL)
But, this is not available on V2R3M0....
On the AS/400 side:
When I issue NETSTAT option 3
" Work with TCP/IP Connection Status "
I get a bottom line error:
" Errors occurred while program was running "
If I see the log:
netstat
Target string filled to maximum length in WRITESTR call.
Exception PSE1078 occurred in statement 35 of routine UPDATECONNINFO,
program QTMNSQRY in library QTCP.
Target string filled to maximum length in WRITESTR call.
Exception PSE1078 occurred in statement 42 of routine UPDATECONNINFO,
program QTMNSQRY in library QTCP.
Target string filled to maximum length in WRITESTR call.
Exception PSE1078 occurred in statement 45 of routine UPDATECONNINFO,
program QTMNSQRY in library QTCP.
Target string filled to maximum length in WRITESTR call.
Exception PSE1078 occurred in statement 35 of routine UPDATECONNINFO,
program QTMNSQRY in library QTCP.
Target string filled to maximum length in WRITESTR call.
Any idea ?
TIA
Paulo Costa
MIS - Sistemas
" My name is Boot, Re Boot "
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---
