RE: Question about subsystem pools

The subsystem monitor job is routed to the *BASE pool (Pool ID 1). The jobs
that run in the subsystem are routed to the *INTERACT or the *SPOOL pool
(Pool ID 2).

This routing is determined by the routing entry defined in the subsystem
object and the routing data defined on the job description object.

A routing entry is selected by comparing the routing entry data located on
the job description to the routing entry description in the subsystem. The
special value of *SYS is used for subsystem monitor jobs (type SBS) and
indicates that the job attributes were defined by the system and did not
come from a job description. The result being that the subsystem monitor
jobs are routed to POOL ID 1.                   

 Kenneth

****************************************
Kenneth E. Graap
IBM Certified Specialist
AS/400 Professional
Network Administrator
NW Natural (Gas Services)
keg@nwnatural.com
Phone: 503-226-4211 x5537
FAX:    603-849-0591
****************************************


-----Original Message-----
From: Allen, Stuart [mailto:sallen@fellowes.com]
Sent: Friday, April 14, 2000 7:40 AM
To: 'Midrange'
Subject: Question about subsystem pools


In the subsystem description for QINTER, it shows as
 Pool        Storage     Activity 
  ID        Size (K)      Level   
   1           *BASE              
   2       *INTERACT              

Shouldn't this subsystem only go into *interact?

Also, my QSPL sbsd shows:

 Pool        Storage     Activity 
  ID        Size (K)      Level   
   1           *BASE              
   2          *SPOOL              

Again, shouldn't this just be *spool?


Anyone have any ideas?

Regards,
Stuart
                                     
Stuart Allen
European Systems Analyst
Fellowes

mailto:sallen@fellowes.com


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---