RE: USA, "Minnesota local question" - 20Gb tape not readable

Thank you -  it is a dual, currently the second is hooked up so that the NT
system can use it for a back up, but it should not be that difficult to
switch it for a try...



-----Original Message-----
From: owner-midrange-l@midrange.com
[mailto:owner-midrange-l@midrange.com]On Behalf Of Jeff Crosby
Sent: Thursday, March 16, 2000 7:04 AM
To: MIDRANGE-L@midrange.com
Subject: Re: USA, "Minnesota local question" - 20Gb tape not readable


"Mark A. Manske" wrote:

> We have a tape from a sold company (Sony 170ME, 8mm 20Gb capacity tape
that
> was saved from an IBM 7208 model 342)
> At corp we have a mammoth tape drive that we use only Exabyte tapes in.
>
> The problem is that we can only read the VTOC (sorry I have been in the
> industry since 1984), and it "claims" that the tape
> was initialized at 5Gb, even though the operator claims that she can only
> init at 20Gb.

Don't know if your Mammoth is a dual drive, but if it is, this may
help.  I had a similar problem some years back.  I had an American
International 911-OCS 8mm dual drive.  We could not read some tapes we
got from IBM.  The drive was capable of off-line copies, however, so we
did an off-line copy from drive A (the upper) to drive B (the lower).
Even though the drive could not read the original tape from IBM, it
successfully performed the copy, and the copy _was_ readable.  Go
figure.

--
-Jeff
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---