× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. MIDRANGE-L
  3. March 2000

Re: Problem starting FTP server

  • Subject: Re: Problem starting FTP server
  • From: Patrick Townsend <townsend@xxxxxxxxxxxxxx>
  • Date: Wed, 08 Mar 2000 18:42:40 -0800
  • Organization: Patrick Townsend & Associates, Inc.
 
Carl,

When you use WRKREGINF you should be able to page down to some lines
that look like this:

QIBM_QTMF_CLIENT_REQ  VLRQ0100     *YES     FTP Client Request Validatio
QIBM_QTMF_SERVER_REQ  VLRQ0100     *YES     FTP Server Request Validatio
QIBM_QTMF_SVR_LOGON   TCPL0100     *YES     FTP Server Logon 
(especially look at this one)

Put an "8" next to these entries and see if an exit point program is
registered for them. If so, you can use "4" to remove the exit point. I
was suggesting you look here as the original abend message mentioned an
exit point. If there's no exit point registered you are probably stuck
with calling IBM support....

Patrick
-- 
IBM AS/400 communications, FTP automation, and network security
software and consulting services.

http://www.patownsend.com

Carl Galgano wrote:
> 
> Patrick:
> I don't see how to unregister the exit point in WRKREGINF.  I have QSECOFR
> authority.
> cjg
> 
> Carl J. Galgano
> EDI Consulting Services, Inc.
> 540 Powder Springs Street, Suite C19
> Marietta, GA  30064
> (770) 422-2995 - voice
> (419) 730-8212 - fax
> mailto:cgalgano@ediconsulting.com
> http://www.ediconsulting.com
> AS400 EDI, Networking, E-Commerce and Communications Consulting and
> Implementation
> 
> -----Original Message-----
> From: owner-midrange-l@midrange.com
> [mailto:owner-midrange-l@midrange.com]On Behalf Of Patrick Townsend
> Sent: Wednesday, March 08, 2000 4:27 PM
> To: MIDRANGE-L@midrange.com
> Subject: Re: Problem starting FTP server
> 
> Carl,
> 
> You might try unregistering the exit point (wrkreginf).
> Patrick
> 
> Carl Galgano wrote:
> >
> > About 2 weeks ago I replace a model 620 for a model 720 for a client.  Now
> > they can not start the FTP server.  Below is an except from the job log.
> > Anyone seen anything like this?? the box is at V4R4.
> > cjg
> >
> > TCP3CAC    Diagnostic              40    03/08/00   10:29:36   QTMFCOM1
> > QTCP        *STMT    QTMFCOM1     QTCP         *STMT
> >                                      From module . . . . . . . . :
> > QTMFPUTL
> >                                      From procedure  . . . . . . :
> > qtmf_ExitPgmIsRegistered
> >                                      Statement . . . . . . . . . :   1852
> >                                      To module . . . . . . . . . :
> > QTMFPUTL
> >                                      To procedure  . . . . . . . :
> > qtmf_ExitPgmIsRegistered
> >                                      Statement . . . . . . . . . :   1852
> >                                      Message . . . . :   Exception CPF3CDB
> > occurred when trying to get information
> >                                        for exit point QIBM_QTMF_SVR_LOGON
> > with format name TCPL0200.
> >                                      Cause . . . . . :   The
> > QusRetrieveExitInformation API returned an exception
> >                                        when attempting to obtain
> information
> > for exit point QIBM_QTMF_SVR_LOGON.
> >                                        Recovery  . . . :   Check the job
> log
> > or the system operator log for other
> >                                        messages. Correct any errors
> > indicated.  Start the FTP program again.
> > TCP12F0    Escape                  40    03/08/00   10:29:36   QTMFSRVR
> > QTCP        *STMT    QTMFSRVR     QTCP         *STMT
> >                                      From module . . . . . . . . :
> > QTMFUTIL
> >                                      From procedure  . . . . . . :
> > qtmf_IssueMessage__FPcT1ie
> >                                      Statement . . . . . . . . . :   5787
> >                                      To module . . . . . . . . . :
> > QTMFSRVR
> >                                      To procedure  . . . . . . . :
> > _CXX_PEP
> >                                      Statement . . . . . . . . . :   1279
> >                                      Message . . . . :   FTP server
> > initialization failure.
> >                                      Cause . . . . . :   The FTP server
> > program could not start, or could not be
> >                                        initialized for an incoming
> > connection request. Recovery  . . . :   Check
> >                                        the job log of the failing FTP
> server
> > job to see if there is any additional
> >                                        error information.  Correct any
> > errors indicated in the job log.  Start the
> >                                        FTP server job again with the
> > STRTCPSVR command. Technical description . . .
> >                                        . . . . . :   This message is
> issued
> > if the FTP server program is unable to
> >
> >                                        obtain storage required for
> > operation, or if an internal program error
> >                                        prevents the FTP server from
> starting
> > successfully.
> > CPF1164    Completion              00    03/08/00   10:29:36   QWTMCEOJ
> > QSYS        00AA     *EXT
> >
> > Carl J. Galgano
> > EDI Consulting Services, Inc.
> > 540 Powder Springs Street, Suite C19
> > Marietta, GA  30064
> > (770) 422-2995 - voice
> > (419) 730-8212 - fax
> > mailto:cgalgano@ediconsulting.com
> > http://www.ediconsulting.com
> > AS400 EDI, Networking, E-Commerce and Communications Consulting and
> > Implementation
> >
> > +---
> > | This is the Midrange System Mailing List!
> > | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> > | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> > | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> > | Questions should be directed to the list owner/operator:
> david@midrange.com
> > +---
> 
> --
> IBM AS/400 communications, FTP automation, and network security
> software and consulting services.
> 
> http://www.patownsend.com
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> david@midrange.com
> +---
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...
Follow-Ups:
Replies:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.