RE: TELNET Disconnections only with some emulators

David --
I've seen symptoms like this when the PC application times out (or something
else causes the frames not to make it back to the AS/400). In one case the
PC's IP stack had a bug and closed the "window" down on the PCs 5250
emulation application.
 I've also seen this if the TCP/IP group PTF is not on the AS/400.
 You indicated all was well until recently, and it sounds like a CUME was
installed. You may need to see if there are TCP/IP related fixes either in
the "HIPER" list on the PSP for your release or know by the support folks.
George Lemen
Sr. Project Analyst, CIBER Inc.
Weyerhaeuser CER Operations Manager
Weyerhaeuser phone: (253) 924-7648; E-mail: George.Lemen@Weyerhaeuser.com
CIBER phone and voice mail: (425) 451-2575 extension 142; E-mail:
glemen@ciber.com

> ----------
> From:         David Shea[SMTP:dshea@arctools.com]
> Reply To:     MIDRANGE-L@midrange.com
> Sent:         Sunday, February 27, 2000 5:18 AM
> To:   midrange-l@midrange.com
> Subject:      TELNET Disconnections only with some emulators
> 
> More Fun with Telnet....
> 
> Pre cum-PTF package, I would successfully connect from a 95 box with CA
> Express, Windows Telnet, Mocha, TN400 (Delphi) or  Nexus Mainframe
> Terminal.
> 
> Suddenly, I can not maintain a connection using either Mocha or TN400.  CA
> Express, Windows Telnet and CA Express all seem to work fine!!!
> 
> The symptom is that I connect and log in OK, but within 30 seconds or so,
> the session drops.  The error message on the AS400 is:
> 
>                          Additional Message Information
> 
>  Message ID . . . . . . :   CPF5140
>  Date sent  . . . . . . :   02/27/00      Time sent  . . . . . . :
> 08:01:08
> 
>  Message . . . . :   Session stopped by a request from device TN400D1.
> 
>  Cause . . . . . :   The request shutdown was caused by either the user
> turning
>    the power off, by a device error, or the ASCII controller inactivity
> timer
>    expired.
>  Recovery  . . . :   Close the files and vary the device off (VRYCFG
> command).
>    If the problem occurs again, enter the ANZPRB command to run problem
>    analysis.
> 
> Any ideas?
> 
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> Time share a current model AS/400 over the internet!
> Individual developers, company development and testing, or full
> outsourcing.
> Get access to RPG, Cobol, C, SQL, Java and more for a low monthly fee.
> http://www.timeshare400.com
> mailto:timeshare400@arctools.com
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> david@midrange.com
> +---
> 
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---