Re: Help TCP - CPI7E9B.

Well it sounds like something pretty basic.  Such as 1) The cable to the Hub 2)
The Hub 3) The cable is connected to a crossover port in the hub (Frequently the
first or last port in the hub) 4) The HUB is actually a T/R MAU (Seen it!) 5)
Your building wiring.

Are you getting any lights on the Hub?  What is the Line Status (WRKCFGSTS)?  Do
you get any lights on the Enet card on the 400?

If the Hub is NOT a switch assure that the Line description is set for *HALF
duplex and also check that the speed is 10M if your equipment can't handle 100M.

HTH - Larry


John P Carr wrote:
> 
> Ok.  Got my new 170 and just put a 3com card ethernet card in the PC,
> Installed
> Client Access Express.  Every thing ok there so far I think.
> 
> But on my 170(as configured out of the box)   I'm getting a CPI7E9B error.
> "" Attention ,  Unable to establish a network link on Ethernet Line
> ETHLINE1 ""
> 
> Anyone got any clues ?
> 
> Doing a WRKHDWRSC ,
> I have CMB01 as my Combined Function IOP,
> I have LIN02 as my LAN adapter, (type 2838)
> I have (under that)  CMN02 as my Ethernet Port. (type 2838)
> 
> TIA,
> 
> John Carr
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---

-- 
Larry Bolhuis         |         What if it's True?
Arbor Solutions, Inc  |
(616) 451-2500        |  
(616) 451-2571 -fax   | 
lbolhui@ibm.net       |
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---