RE: Change telnet to another port?

It is easy to change the telnet client to use a different port but I have
tried changing the telnet server to no avail.  Hopefully some one on this
list knows how to change the telnet server on the as400.

For client access under communications, which is where you set the system
name or IP there is the port number.  Changing it and then saving the
session definition should get the client to use a different port, but then
that doesn't work unless you change your telnet server to match.

Christopher K. Bipes     mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst   mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.         http://www.cross-check.com
6119 State Farm Drive    Phone: 707 586-0551 x 1102
Rohnert Park CA  94928 Fax: 707 586-1884

*Note to Recruiters
Neither I, nor anyone that I know of, is interested in any new and/or
exciting positions. Please do not contact me.


-----Original Message-----
From: William A.(Tony) Corbett [mailto:corbett@asresources.com]
Sent: Thursday, February 03, 2000 10:21 AM
To: midrangel
Subject: Change telnet to another port?

Can I change the configuration on my 170 to "listen" and use another
port for telnet, ie., can I still access my AS400 using client access,
which uses port 23 by default?
Most all 5250 clients (based on my limited knowledge) use port 23 to
"telnet" into the AS400...
How do I change the AS400 configuration and the Client Access
configuration to use another port?
Any suggestions on which port to use?

Your help is appreciated, thanks......

--
William A.(Tony) Corbett
corbett@asresources.com
http://www.asresources.com
http://www.cbt400.com
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---