Re: ECS doesn't work

You should be able to go into the system service tools (STRSST (*SERVICE
authority required)) and look at the non reporting hardware and delete the
old card definitions.
CJG

Carl Galgano
EDI Consulting Services, Inc.
540 Powder Springs Street
Suite C19
Marietta, GA  30064
770-422-2995
mailto: cgalgano@ediconsulting.com
http://www.ediconsulting.com
EDI, Communications and AS400 Technical Consulting

-----Original Message-----
From: Chris Bipes <rpg@cross-check.com>
To: 'MIDRANGE-L@midrange.com' <MIDRANGE-L@midrange.com>
Date: Wednesday, December 08, 1999 1:28 PM
Subject: RE: ECS doesn't work


>Talk to your CE about your rack configuration.  They should help you edit
>this and get all your hardware resources correct.  The system does not
>necessarily update the files correctly.  Especially if you move a card or
>replace a card with a different one.  I argued with my CE on who's
>responsible for updating the rack configuration / Hardware resources.  He
>said it was a billable thing and I said it should have been done when He
>moved/update the card/drives in the system.  Well I did it with our
>operations manager and an outside consultant.  Between the three of us we
>were able to identify the physical hardware and update the files.
>
>Christopher K. Bipes mailto:ChrisB@Cross-Check.com
>Sr. Programmer/Analyst mailto:Chris_Bipes@Yahoo.com
>CrossCheck, Inc. http://www.cross-check.com
>6119 State Farm Drive Phone: 707 586-0551 x 1102
>Rohnert Park CA  94928 Fax: 707 586-1884
>
>*Note to Recruiters
>Neither I, nor anyone that I know of, is interested in any new and/or
>exciting positions. Please do not contact me.
>
>
>-----Original Message-----
>From: Gary Kuznitz [mailto:docfxit@calwest.net]
>Sent: Wednesday, December 08, 1999 9:23 AM
>To: MIDRANGE-L@midrange.com
>Subject: RE: ECS doesen't work
>
>
>Thanks Tim.  That's just what I need right now.  More confusion.
>
>Talk about confusion.  I thought maybe the qesline may have a problem so
>I deleted it.  I ran the program QTIINSTL and it recreated the line just
>fine.  I saw it.  Yes I did a F5 to refresh the screen.  I veryed it on and
>off.  No problem.  I did a SNDSRVRQS *TEST.  I got an error CPF2601
>Line  description not found.  I did it all over again.  Same results.  I
>proceeded with a RCMSTG.
>
>Then to add to the confusion.  The resource in the rack description is
>wrong.  The book "Setting Up Your 9401 Model 150" says on page 1-15 to
>connect the cable to the left side of the adapter card position 2B.  The
>book also shows a picture of the back side of the 150 and 2B is the
>second card from the bottom on the left connector page 1-23.  I tested it
>and it responds just fine.   When I do a Wrkhdwrsc it shows the resource
>in 1B.  The rest of the resources are just as messed up.  The Ethernet line
>it shows should be in 1C when it's actually in 2C (and the book confirms
>this)  And it is actually working in 2C.  Why would the factory settings
>show the rack wrong?  Or is there a PTF that I haven't found that fixes
>this?  Or is there another book that tells you to add 1 to all resource
>names in Wrkhdwrsc?  After all 1B + 1 = 2B.   1C + 1 = 2C.  Maybe I'm
>supposed to modify the rack config from the factory settings?
>
>Thanks,
>
>Gary Kuznitz
>
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
david@midrange.com
>+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---