RE: AnyNet

SNA is very timing critical compared to TCP/IP. Could you be having
enough of a delay that 1 system or the other says whoever I was talking
to is gone so I'll shutdown the link/conversation?? The reason I say
this I was involved in a wan project with SNA over IP and some sites ran
fine others where real pigs with disconnects for packet problems(timing)

---------------------------------
Kirk Goins
IBM Certified AS/400 Technical Solutions
Pacific Information Systems
503-290-2104
kirkg@pacinfosys.com
---------------------------------


> -----Original Message-----
> From: Chris Bipes [SMTP:rpg@cross-check.com]
> Sent: Tuesday, December 07, 1999 12:50 PM
> To:   Midrange-L (E-mail)
> Subject:      AnyNet
> 
> I am having an ICF program fail with Major/Minor codes 81/96 -
> "Communications support has ended the session".  This ICF program run
> without a hitch using pure APPC controller over our LAN.  When I
> switch to AnyNet controllers, still plugged into the LAN the same, I
> start getting the errors.  I am going to need to connect thru the
> internet when the system is fully up and running which is why I am
> trying to use AnyNet support, (APPC over IP).  One machine is a 170 @
> V4R4 current on cums and the other is an 720 @ V4R3 and also current
> cums.
> 
> We are also running SNADS, DDM and Remote Data queues between the
> as400s.  I have check all the TCP/IP configurations as well as Network
> Attributes, MODs, COSs ect.  Where else should I be looking?  I am
> currently RTFM for other possible places to look.
> 
> 
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---