RE: setting up smtp server

Is the subnet of your AS400 in the same subnet as your smtp gateway?  If
not, you will need a router or router/firewall software on a PC.  You can
then define a route on your AS400 to send from one subnet to another via the
router.  The other choice it to assign your AS400 a second IP address in the
same subnet as your smtp gateway, but then you have no firewall between your
AS400 and the internet.  Look at option 2 from CFGTCP or use the command
ADDTCPRTE.

Good Luck,

Christopher K. Bipes     mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst   mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.         http://www.cross-check.com
6119 State Farm Drive    Phone: 707 586-0551 x 1102
Rohnert Park CA  94928 Fax: 707 586-1884

*Note to Recruiters
Neither I, nor anyone that I know of, is interested in any new and/or
exciting positions. Please do not contact me.


-----Original Message-----
From: Chris Beck [mailto:CBeck@good-sam.com]
Sent: Tuesday, November 23, 1999 8:43 AM
To: MIDRANGE-L@midrange.com
Subject: setting up smtp server


I am looking for help setting up my 400 for just sending email.   if some
one can give me some advice or point me to a faq or something.

when i do a snddst i get a error no route to smtp gateway.

any help would be greatly appreciated
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---