RE: Rack Config rules

go to STRSST, select Start a Service Tool, then 7 - Hardware Service
Manager, then F6 to print. (you'll need allobj to do this)

HTH

Regards,
Stuart
                                     
Stuart Allen
European Systems Analyst
Fellowes

Tel: +44 1302 892273
Fax: +44 1302 890003
mailto:sallen@fellowes.com


> -----Original Message-----
> From: Dan Rasch [SMTP:drasch@mail.win.org]
> Sent: Thursday, November 18, 1999 1:33 PM
> To:   MIDRANGE-L@midrange.com
> Subject:      Rack Config rules
> 
> 
> What are the rules for printing a rack config?
> 
> I was used to WRKHDWPRD, option 1, and F17 to print.
> 
> I understand this changed to DSPHDWRSC, *AHW and *PRINT with a later
> version.  
> 
> But at some client sites, it is not working.  I also have been told the
> rack config has to be entered manually during installation.  Is this
> really true?  It seems the system should already know what it's internals
> look like, and where they reside.
> 
> I also dabbled with the DSPLCLHDW command for similar results.  
> 
> Is there a consensus out there ??
> 
> Dan Rasch - because if the human species concentrated on the really 
> important things in life, there would be a shortage of fishing poles!
> 
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> david@midrange.com
> +---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---