× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: RE: DASD - Raid / Mirror Config.
  • From: Chris Cole <ChrisC@xxxxxxxxxxx>
  • Date: Wed, 13 Oct 1999 16:19:13 +0100

The S20 in question has a #2741 installed which is RAID capable for the all
disks, including load source.  I know as I configured it.  Set device parity
for the whole set Nick.  This will give you 72GB usable DASD.  If you want
to set 2 RAID arrays (ie 2 parity sets of 5 disks), you will have extra
protection but lose an additional 8GB capacity ie 64GB usable.

Contact me offline if you like.

Regards

Chris Cole    

-----Original Message-----
From: Al Barsa, Jr. [mailto:barsa2@ibm.net]
Sent: 13 October 1999 17:36
To: MIDRANGE-L@midrange.com
Subject: Re: DASD - Raid / Mirror Config.


At 09:59 PM 10/12/1999 +0100, you wrote:

The initial implementation of RAID-5 did not permit RAID support of the 
MFIOP (which contains the load source), so you had to mirror the 
MFIOP.  With the generation of hardware that included the S20 (which was 
the 600 series), you could put RAID on the MFIOP.

I am unsure if you had to purchase a special controller.

Al


>Hi,
>
>Quick question...... I have a model s20 with V4R2.
>
>I have 10 x 8Gb drives and what to enable RAID, On my other machines, and
>historically I always mirrored the load source disk, or at least I did
under
>V3R7.
>
>I took the option from DST to start mirroring, but I cant see where I tell
>it to only mirror unit 1 onto 2.
>
>In addition, I have started raid, and it is looking at all 10 disks
>including the load source.
>
>1. Can you raid protect you load source ?
>2. If so, is this new with 4.2 ?
>3. If not, then what am I missing re the mirroring of the load source ?.
>
>I have looked in the V4R2 Backup & Recovery, but what to confirm.
>
>Many thanks
>Nick
>
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
david@midrange.com
>+---



+--------------------------------------------------+
| Please do not send private mail to this address. |
| Private mail should go to barsa@ibm.net.         |
+--------------------------------------------------+

Al Barsa, Jr. - Account for Midrange-L
Barsa Consulting, LLC.  
400 > 390

Phone:          914-251-1234
Fax:            914-251-9406
http://www.barsaconsulting.com
http://www.taatool.com

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---


***********************************************************************
Any views expressed in this message are those of the individual sender,
except where the sender states them to be the views of Itex Limited.

This email is intended only for the individual or entity to which it is
addressed and contains information that is private and confidential. If
you are not the intended recipient you are hereby notified that any
disemination, distribution or copying is strictly prohibited. If you 
have received this email in error please delete it immediately and
advise us by return e-mail to administrator@itexjsy.com.

***********************************************************************
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.