RE: Leased Line AS/400 access

How are cables run from building to building?  See if you can get your own
cable pulled down under ground conduit and use fiber?  Expensive but very
flexible, you can attach what you want on both ends.  What is the distance?
Using local phone company means miles of cable and repeaters between you and
that office 2 block down the street.  If you can run your own cable and put
in your own repeaters you would be better off.  There are concentrators that
will accept voice, data, network traffic and push down a fiber connection to
go building to building.  Several grand to install but you own and very low
maintenance cost.  Or you can up your leased line + add new to third
building and pay local phone for "eons".  (pay now or later)  Want more
confusion, search the web on connecting buildings.  Most fiber can run 5,000
feet or more.  Just a rambling thought or two.


Christopher K. Bipes    mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst  mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.        http://www.cross-check.com
6119 State Farm Drive   Phone: 707 586-0551 x 1102
Rohnert Park CA  94928  Fax: 707 586-1884

*Note to Recruiters
I nor anyone that I know of is interested in any new and/or exciting
positions. Please do not contact me.


-----Original Message-----
From: Jeff Crosby [mailto:jlcrosby@fwi.com]
Sent: Wednesday, September 29, 1999 1:32 PM
To: Midrange List Server (David Gibbs)
Subject: Leased Line AS/400 access


We have a 2nd building 7 blocks down the street.  For eons now we have
connected this 2nd building to our main building (here) via a leased
line.  At the other end is a Win 3.1 PC and PC printer.  We run Client
Access remotely.  The modems are IBM 3865s at 9600.  (I would have put
in faster modems long ago except the SDLC card is limited to 9600, so
why bother . . .)

I need to replace the PC for Y2K compliancy with a PC running Win98. 
This site needs a 5250 session and printer emulation.  I want them up
all day, not dial up.  They need to update a spreadsheet weekly that is
stored on the AS/400 in the IFS.  (It takes 5 mins to open this
spreadsheet at 9600, what a pain.)  We have twinax and ethernet (TCP/IP)
at the main site.  I want the flexibility to have other devices at the
remote location in the future.  In addition, there may very well be a
3rd site (2 blocks down the street in the _other_ direction) in the near
future that I would want connected to the main building as well.

What is the best way to connect these site(s) to us?  A remote LAN
access of some kind?  Frame relay?  I know enough about these things to
be dangerous.  In the old days, there was usually 1 way to do something
and that's how you did it.  Now there are many more options.  Microage
and other PC vendors know LANs and remote access and such, but don't
know squat about the AS/400.  IBM and IBM Business Partners may tend to
ignore some lower cost solutions in favor of an all IBM answer.  Any
help pointing me to places with answers is appreciated.

Thanks.

-- 
-Jeff
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---