Re: Cisco 2500 to a 9406-170

Um, yah that would do it!
 - Larry

Art Tostaine, Jr." wrote:
> 
> How about something as simple as station address set to C2 instead of C1?  
>We're working on it.
> Thanks!
> 
> Art Tostaine, Jr.
> CCA, Inc.
> Jackson, NJ 08527
> 
> -----Original Message-----
> From: owner-midrange-l@midrange.com
> [mailto:owner-midrange-l@midrange.com]On Behalf Of Larry Bolhuis
> Sent: Friday, September 24, 1999 2:15 PM
> To: MIDRANGE-L@midrange.com
> Subject: Re: Cisco 2500 to a 9406-170
> 
>   Yup you got it right now-IBM cable to Cisco Cable. Not even Black Box has a
> cable with a Cisco high density connector on one end with an IBM PCI 
>connector on
> the other. Even less likely they'd get the pins right!!!
> 
>   The netwizards need to make some change to the Cisco no doubt. Likely they 
>have
> the clocking option wrong or some such. (I am assuming here that you have a
> Line/Controller/Device in a 'Vary On Pending' status, the Line actually may be
> 'Varied On'.
> 
-- 
Larry Bolhuis         | What do You want to Reload today?
Arbor Solutions, Inc  |
(616) 451-2500        | 
(616) 451-2571 -fax   | Two rules to success in life:
lbolhui@ibm.net       | 1. Never tell people everything you know.
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---