Re: Cisco 2500 to a 9406-170

  Yup you got it right now-IBM cable to Cisco Cable. Not even Black Box has a
cable with a Cisco high density connector on one end with an IBM PCI connector 
on
the other. Even less likely they'd get the pins right!!!

  The netwizards need to make some change to the Cisco no doubt. Likely they 
have
the clocking option wrong or some such. (I am assuming here that you have a
Line/Controller/Device in a 'Vary On Pending' status, the Line actually may be
'Varied On'.

 - Larry

"Art Tostaine, Jr." wrote:
> 
> The supplied cable does fit on the AS/400, but does not fit on serial 1 of 
>the router.  The router
> as some special looking connector, with approx 50 pins and very small.
> 
> Right now I have the cisco cable connected to the IBM cable.  The network 
>techs say they can see the
> AS/400 change status, but we're not up.
> 
> We might have some kind of configuration change to make.
> 
> Art Tostaine, Jr.
> CCA, Inc.
> Jackson, NJ 08527
> 
> -----Original Message-----
> From: owner-midrange-l@midrange.com
> [mailto:owner-midrange-l@midrange.com]On Behalf Of Larry Bolhuis
> Sent: Thursday, September 23, 1999 4:07 PM
> To: MIDRANGE-L@midrange.com
> Subject: Re: Cisco 2500 to a 9406-170
> 
> You need the standard IBM V.24 cable. It should have come with your AS/400,
> although with the new systems you can order cards without cables.  That cable
> will have the V.24 connector you need.  It is extremely unlikely that any NON 
>IBM
> cable's will correctly work when directly attached to any AS/400 CISC or RISC.
> 
>  - Larry
-- 
Larry Bolhuis         | What do You want to Reload today?
Arbor Solutions, Inc  |
(616) 451-2500        | 
(616) 451-2571 -fax   | Two rules to success in life:
lbolhui@ibm.net       | 1. Never tell people everything you know.
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---