× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Try these...

1. Point your browser to http://www.midrangecomputing.com/search/ and key
"some assembly required" into the keyword search field. This should present
you with a reference to "The Model 170: Some Assembly Required" which is a
.pdf from a recent article in Midrange Computing magazine. Without refering
to A9002000 specifically, the article does provide the instructions to
change the System Console Type from a PC to a local workstation.

If this doesn't work,

2. Point your browser to
http://as400service.rochester.ibm.com/supporthome.nsf/a80bff372a96bdfa862567
2700593d01/76832b5b5752eb508625673c008314ad?OpenDocument

Although it refers to SRC A9002000 appearing during a CISC-RISC Transition,
it does present a solution.

-----Original Message-----
From: owner-midrange-l@midrange.com
[mailto:owner-midrange-l@midrange.com]On Behalf Of William A.(Tony)
Corbett
Sent: September 13, 1999 12:53 PM
To: MIDRANGE-L@midrange.com
Subject: SRC - A900 2000 - ALWAYS


Any ideas on how to get rid of this src code ALWAYS showing??
Here's what happened:
I ordered the 170 with the twinax option, for the express purpose of putting
a no-problems dumb terminal as the console (and for any twinax devices I may
want in the future).  When I installed (V4R3 originally, I'm now on V4R4),
my pc had no place left (out of resources/IRQ's) to install the "pc as
console".  So I just dropped it.  Now, I'm always showing src code A900-2000
on the panel.  I don't really want the PC Console option, I prefer a dumb
terminal as the console.
It's a card problem, I believe, I needed a 2xxxx verses a 9xxxx card (I
don't remember the rest).
I've talked to the gurus in Rochester, no real help.....

Any ideas from any of you IBM guys????  I'm sure I'm not the only one with
this "problem" and I'd really like my 170 to show a "normal" display.......

--
William A.(Tony) Corbett
corbett@asresources.com
http://www.asresources.com
http://www.cbt400.com


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.