RE: Mapping Drives with CA400 -Reply

Archie,

Though the drives are mapped, they go nowhere and contain nothing.  But,
when you try to use a drive letter, Windows says the drive is already
attached?  Which is not true.  I suspect from the responses I've been
receiving, that this is a Windows 95 problem.  I tried bring the BIOS
back to factory settings, deleting the drives in Device Manager (in
Control Panel, systems) and re-booting.  Didn't work.  The last resort
will be to run ZZTop and bring the whole computer back to factory
install settings and re-load software.  Thank you for your reply.

Melenie Weaver

-----Original Message-----
From: Archie Cameron [mailto:AGCAMER@mailhost.polarisind.com]
Sent: Friday, August 20, 1999 9:03 AM
To: MIDRANGE-L@midrange.com
Subject: Re: Mapping Drives with CA400 -Reply


I suspect Glenn is right but I seem to remember you saying that your
search drives were not mapped prior to installing CA.  If not,  what are
the mapped drives prior to CA install and then what are they after.
After
you make a connection can you go in and disconnect the mapping of any
of the drives, say f: - z:?  Can you go out to Network neighborhood and
see the AS400 and its objects/libs.  
These are not help questions I am just curious.  CA has done some real
brutal things to me this last go around ; not on every box, but it is
hard to
find a common denominator.  v3.2.0 sf57002
Arch
>>> Glenn Gundermann <ggundermann@rachisholm.com> 08/19/99
11:32am >>>
Melenie,

Sounds to me that this is a PC or Network Properties issue and not
Client
Access.  All of the drives were probably already mapped before the
install
process.

Glenn Gundermann
Ronald A. Chisholm Limited
Toronto, Canada

Weaver, Melenie wrote:

> H E L P!!  We have CA 400 for 95/NT V3R1M3 with SF55374.  I recently
> loaded it on to a Dell PC 5166 w/192MRAM.  After installing CA and
> setting up a 5250 Session I went to map a drive on the AS400.  Low
and
> behold every drive was already mapped on this computer from A..Z?  It
> would not let me map a drive because it was already there in Explorer.
> I uninstalled CA and re-installed it to no avail.  Does anyone know
how
> to get rid of those virtual drives on the computers hard drive.  It
> seemed to happen when I loaded CA?  Never happened before or
since?
> They will not delete?  Any suggestions would be helpful.
>
> Thank you,
>
> Melenie Weaver
>
> Network Support Specialist
> Citrus County Schools
> meleniew@dscntexchange.citrus.k12.fl.us

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to
MIDRANGE-L@midrange.com.
| To subscribe to this list send email to
MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---