× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



I think that system B needs to be defined as a network node.  It is defined
in the NETA for the machine, however I believe that when you create the APPC
controller you can specify it is a *NETNODE.
CJG
Carl Galgano
EDI Consulting Services, Inc.
540 Powder Springs Street
Suite C19
Marietta, GA  30064
770-422-2995
mailto: cgalgano@ediconsulting.com
http://www.ediconsulting.com
EDI, Communications and AS400 Technical Consulting

-----Original Message-----
From: Jeffrey Young <jefyoung@worldnet.att.net>
To: MIDRANGE-L@midrange.com <MIDRANGE-L@midrange.com>
Date: Sunday, August 15, 1999 3:02 PM
Subject: APPN Question


>I have 3 AS/400 systems that are connected to each other.  System A, System
>B, System C.
>System A is connected to System B via a 14.4 dial link.  System B is
>connected to System C via a LAN connection.
>
>I can pass thru to System B from System A, and then from System B to System
>C.
>
>System A network attributes are:
>Local Location Name = SYSTEMA
>Local Control Point Name = SYSTEMA
>Local Network Id = APPN
>
>
>System B
>Local Location Name = SYSTEMB
>Local Control Point Name = SYSTEMB
>Local Network Id = APPN
>
>System C
>Local Location Name = SYSTEMC
>Local Control Point Name = SYSTEMC
>Local Network Id = APPN
>
>
>I can not change any of these network attributes.
>
>I have tried APPN remote config lists, creating an explicit APPN device for
>System C on System A, and a number of other methods with no luck.
>What I would like to do is connect to system C directly from System A after
>the dial connection to System B is established.
>
>All suggestions are appreciated.
>
>
>Jeff Young
>Dynax Resources, Inc
>Certified AS/400 Technical Specialist
>Certified AS/400 RPG Programmer
>Certified AS/400 Professional System Administrator
>>
>
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
david@midrange.com
>+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.