Re: export direct from AS400 to PC w/o CA

I had this same problem previously.  We have the 400 initiate a 
command on the PC to upload a file via CA/400 and then the 400 
processes it.  We had to ensure that the NT signon and the 400 
signon match, userid, password and case.  The NT pc was in a 
seperate domain.  We moved it into the main domain.  Also don't 
mix and match TCP/IP and SNA.  Repeat, if the PC is hooked up 
via SNA or TCP/IP then use the same protocol on your RUNRMTCMD.  I
 keep thinking there was one or two other things.  (I've done 
this for 3 seperate shop floor PC's).  But, I've gotta go.  
Hope that this is a start.





fkolmann@revlon.com.au on 07/28/99 09:03:17 PM
Please respond to MIDRANGE-L@midrange.com@Internet
To:     MIDRANGE-L@midrange.com@Internet
cc:      
Fax to: 
Subject:        Re: export direct from AS400 to PC w/o CA

I am trying to exactly the same thing.
That is.
Automate the transfer of data from a PC WinNT to an AS400, but controlled by the
AS400.
We have CA and TCP-IP and I can FTP and RFROMPCB and COPY to a folder and I can
RUNRMTCMD back to the pc but,

All those transfers that work fine if I run them from the PC
will NOT run if I activate them via RUNRMTCMD,  its some sort of security 
problem
about NT needing to log on to the AS400 again.

Carl Galgano wrote:

> be sure you are running an FTP server on your PC.
> Carl Galgano
> EDI Consulting Services, Inc.
> 540 Powder Springs Street
> Suite C19
> Marietta, GA  30064
> 770-422-2995
> mailto: cgalgano@ediconsulting.com
> http://www.ediconsulting.com
> EDI, Communications and AS400 Technical Consulting
>
> -----Original Message-----
> From: Mike Cunningham <MCUNNING@pct.edu>
> To: MIDRANGE-L@midrange.com <MIDRANGE-L@midrange.com>
> Date: Tuesday, July 27, 1999 6:05 PM
> Subject: RE: export direct from AS400 to PC w/o CA
>
> >I can and have done the automated FTP to an NT server, and I know that
> W95/98/NT comes with FTP and I have used that in an interactive process
> where I start a DOS session, run ftp to the AS/400, logon and download.
> What I would like to do is automate file transfers to the PC from the AS/400
> without PC user intervention.  A scenerio something like this....
> >
> >User starts a CA 5250 session
> >Signons and gets a menu
> >runs one of my applications (like a class roster)
> >presses a command key that I have labeled "copy roster to C: drive"
> >RPG/CL application builds the file, does CPYTOPCD, initiates FTP on the
> AS/400 to put it to C: drive on the PC
> >
> >From everything I have investigated this can't be done.  I'm a missing
> something ?
> >
> >
> >+---
> >| This is the Midrange System Mailing List!
> >| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> >| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> >| To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> >| Questions should be directed to the list owner/operator:
> david@midrange.com
> >+---
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---