Re: HP2500C+ attached to AS/400

The most important thing that you need to know is the TCP/IP SPOOLING  PORT
for the printer Ethernet adapter.  This varies by manufacturer and must be
specified in the CRTDEVPRT command.
I think the port for HP is 9100 for Jet Direct cards.

Jeff Young
Dynax Resources, Inc
-- Certified AS/400 Technical Specialist
-- Certified AS/400 Professional System Administrator
-- Certified AS/400 RPG Programmer
----- Original Message -----
From: Jeff Crosby <jlcrosby@fwi.com>
To: Midrange List Server (David Gibbs) <MIDRANGE-L@midrange.com>
Sent: Wednesday, June 23, 1999 3:26 PM
Subject: HP2500C+ attached to AS/400


> All,
>
> We're considering an HP2500C+ printer for our network.
>
> I've never installed a printer onto the AS/400 via ethernet before.  Are
> there gotchas that don't exist with twinax?  I assume it will
> autoconfig, but as what?  Anyone been there, done that?
>
> Thanks.
>
> --
> -Jeff
>
> jlcrosby@fwi.com
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---