× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Don't do this. You don't need to change the node type. Starting QCMN
should have nothing to do with this connection unless you've modified
the communication entries in the subsystem. Setting up SNADS and
starting QSNADS won't do anything as far as establishing the link. I
think Carl has you on the right track.

Tim 

> -----Original Message-----
> From: Billy Rowe [SMTP:billyrowe@usa.net]
> Sent: Thursday, May 13, 1999 10:20 AM
> To:   MIDRANGE-L@midrange.com
> Subject:      Re: Q: APPN config
> 
> benji@intercomputer.hu wrote:
> > 
> > I have a very simple question: what configuration steps are needed
> to
> > setting up APPN between two AS/400s in a LAN environment (Ethernet)?
> I set
> > up the line descriptions, and TCP/IP is working, but would like to
> use SNA
> > too.
> > 
> You need to define 1 of the AS/400's as a network node and 1 as a end
> node via the 
> CHGNETA/DSPNETA commands.
> 
> Setup your SNADS/distributions services:
> 
> GO NETCFG
> 
> Option 2 - Configure distribution services
> 
> setup your distribution queues and routing tables on each system.
> 
> Start subsystems QCMN, QSNADS
> 
> The controller descriptions on each system should be automatically
> created as APPN
> capable.
> 
> You should then be able to use SNADS commands: SNDNETF, SNDNETMSG,
> etc.
> 
> 
> This is all I think of right now.
> 
> Hope this helps!!
> 
> 
> billy
> 
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> david@midrange.com
> +---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.