Re: CA/400 pass through to other AS/400s

System A is a netnode (see chgneta example below). It did not require an IPL
directly but since CA/400 virtual controllers are APPC I had to find a period
when all PC users were off which happened to be right after the regular weekend
IPL.

Roger Vicker, CCP

Carl Galgano wrote:

> Be sure system A is a netnode.  Use DSPNETA or CHGNETA, I believe it
> requires an IPL (oh no is this WINNT?).
> Carl
> Carl Galgano
> EDI Consulting Services, Inc.
> http://cgalgano.home.mindspring.com
> mailto://cgalgano@ediconsulting.com
> (770) 422-2995
>
> -----Original Message-----
> From: Roger Vicker <rvicker@mddc.com>
> To: Midrange List <MIDRANGE-L@midrange.com>
> Date: Thursday, November 12, 1998 10:35 PM
> Subject: CA/400 pass through to other AS/400s
>
> |Can anyone point out what I have missed in the books? I am trying to
> |pass through System "A" to System "B" for shared folders and printers.
> |I can go to a display session on System "A" and strpasthr
> |rmtlocname(B) but I can not start a router connection to system "B".
> |
> |I get an error that "The AS/400 system name is not valid or there is a
> |problem with the QPCSUPP mode on the AS/400."
> |
> |Configuration is as follows.
> |
> |PC    ----- CA/400 - Managing system "A" and another connection of
> |type "APPN" system "B"
> |   |
> |Twinax
> |   |
> |AS/400 A   ----- CHGNETA SYSNAME(A) LCLNETID(APPN) LCLCPNAME(A)
> |   |       -----      NODETYPE(*NETNODE)
> |   |       ----- CFGL QAPPNLCL --- LocalLoc(A)
> |   |       ----- CFGL QAPPNRMT  RemoteLoc(B) RemoteNet(APPN)
> |   |       -----    LocalLoc(A) ControlPointNet(APPN)
> |   |       ----- V3R2M0
> |   |
> |SDLC dedicated line
> |   |
> |AS/400 B  ---- CHGNETA SYSNAME(B) LCLNETID (APPN) LCLCPNAME(B)
> |          ----        NODETYPE(*ENDNODE)
> |          ---- CFGL QAPPNLCL --- LocalLoc(B)
> |          ---- CFGL QAPPNRMT  RemoteLoc(A) RemoteNet(APPN)
> |          ----        LocalLoc(B) ControlPointNet(APPN)
> |          ---- V4R2M0
> |
> |Mode description . . . . . . . . . :
> |QPCSUPP
> |
> |Class-of-service . . . . . . . . . :
> |#CONNECT
> |Maximum sessions . . . . . . . . . :
> |64
> |Maximum conversations  . . . . . . :
> |64
> |Locally controlled sessions  . . . :
> |0
> |Pre-established sessions . . . . . :
> |0
> |Maximum inbound pacing value . . . :
> |*CALC
> |Inbound pacing value . . . . . . . :
> |7
> |Outbound pacing value  . . . . . . :
> |7
> |Maximum length of request unit . . :
> |*CALC
> |Data compression . . . . . . . . . :
> |*ALLOW
> |Inbound data compression . . . . . :
> |*LZ10
> |Outbound data compression  . . . . :
> |*LZ10
> |Session Level Encryption . . . . . :
> |*NONE
> |Text . . . . . . . . . . . . . . . :   AS/400 PC Support mode entry
> |
> |TIA
> |
> |Roger Vicker, CCP
> |--

--
*** Vicker Programming and Service *** Have bits will byte ***
http://www.vicker.com ***
In data, the figure most obviously correct, is an error.



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---