MIDRANGE dot COM Mailing List Archive



Home » MIDRANGE-L » February 1998

Re: TCP/IP Printing to an IP address and Port


  • Subject: Re: TCP/IP Printing to an IP address and Port
  • From: "Marc Zylka" <mzylka@xxxxxxxxxxx>
  • Date: Sat, 21 Feb 1998 23:39:59 -0500

fixed

>>The port numbers are 3001, 3002, and 2501.


>Not familiar with NEtPort, but my guess is that you can't do it unless
>the serial is 3001, which it probably is not.
>I had the same problem with the JetDirect Plus 3 which has three parallel
>ports.

In this case, the serial port is 2501 on the NetPort.  I was given a note
from Intel tech support about using COM1_PASSTHRU but
I don't have any details on where this is set up.

Marc ( mzylka@netpath.net )




+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---






Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2014 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact