Re: tcp/ip terminal emulator program

We also use Rumba/400 that came with the Win3.11 version of CA/400.  
We use it for Win3.11 clients and Win/95 clients.  It is stable and 
easy to install and use.  We have it configured for TCP/IP.  It will 
also work as a remote client using winsock.

For printing, we use our Novell 4.1 server.  It has LPD support, so 
we make a netware queue for each user or department. On the AS/400 
when an outq is created, we set it up as *IP, the IP address of the 
Netware server and the Netware queue name.  The AS/400 then sends the 
printouts to the netware server.  Though direct printing is quicker, 
this setup will deliver printouts in a reasonable amount of time.  
For us, usually less than 25 seconds.

Hope this helps....

On 14 Jan 98 at 7:53, bdietz@3x.com wrote:


> Another product you can look at is RUMBA/400.  The verision I mean is the
> one that shipped
>  with Client Access for Win3.1.  It has a TN5250 interface.  You probably
> already have paid for
> the license so the price is right.  You shoud check it out QPWXCRB folder
> or IFS or CD
> depending on your version.  We use it here for our remote access.  I was
> able to scale down
> the install to ZIP onto 1 diskette.
> As for your printing needs I think the two major ones are NIPRINT and RPM.
>   I have tried many LPD's
> and they all work pretty much the same.
> 
> Bryan Dietz
> 3X Corp.
> 
> >i've configured dial-p slip to as/400 (previously configured all the
> >TCP/OP stuff) for entering to AS/400 from anywhere.
> >
> >i'm looking for select a terminal (TN5250?) program (i prefer don't
> >install all the CAwin95 in laptops). (obviously all these tn5250 works
> >also in an local network not only in remote.)
> >
> >i've downloaded and in testing
> >- PowerTerm (149$)
> >- Mocha (25$)
> >
> >Anybody knows other?
> >please comments experiences.
> >
> >specially interest is
> >- 5250 print (i.e. normal AS/400 spools)
> >- File Transfer
> >
> >Thanks in advance
> >____________________
> >Guillermo Andrades
> >CPI, Madrid
> >
> >+---
> >| This is the Midrange System Mailing List!
> >| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
> >| To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> >| Questions should be directed to the list owner/operator:
> david@midrange.com
> >+---
> >
> Carl J. Galgano
> http://cgalgano.home.mindspring.com
> mailto:cgalgano@ediconsulting.com
> EDI Consulting Services, Inc.
> 540 Powder Springs Street
> Suite C19
> Marietta, GA 30064
> 770-422-2995
> 
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
> uucp
> 

======================================================================
Bill Phelps                     Phone: 501-245-5567
Ouachita Baptist University     Fax  : 501-245-5500
Arkadelphia, AR  71998          email: phelpswr@alpha.obu.edu
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---