× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Not in the new world.  Besides, putting cards in a machine isn't exactly
rocket science.  As Neil alluded to, the hard part is knowing where to put
the card.  But there are plenty of resource to find out that info.  I have
seen many instances where the CE does not do the work.  Buy some new drives
for a model 400.  The CE may come in and install the physical drives in the
frame, but that is it.  It is up to the user to add them to the ASP or set
up either mirroring/RAID.  Buy used equipment and you are on your own even
more.
Carl

At 05:02 PM 12/1/97 -0800, you wrote:
>Jeff_Velten@at-a-glance.com wrote:
>> 
>> Hello list,
>> I have an opportunity to do some configuration work for a nearby company.
>> One of the things they've asked about is installing an Ethernet card. I
>> don't have specific model information, but they have a 9404 or 9406 CISC
>> model AS/400. Is there any thing involved in the card installation other
>> than the following?
>> 
>> 1. Check system value QAUTOCFG, make sure it is set to 1
>> 2. PWRDWNSYS RESTART(*NO)
>> 3. Install Ethernet card in free slot.
>> 4. Restart system
>> 5. STRSST, and ensure that the card was recognized properly, determine
>> resource name.
>> 6. Assign a line description to the resource, vary it on, and begin
>> testing.
>> 
>> TIA,
>> Jeff
>
>This isn't normally done by the user ... CE does the install.....
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
>| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator: david@midrange.com
>+---
>umidr
>
Carl J. Galgano
http://cgalgano.home.mindspring.com
mailto:cgalgano@ediconsulting.com
EDI Consulting Services, Inc.   
540 Powder Springs Street
Suite C19
Marietta, GA 30064
770-422-2995
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.