× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Dennis Lovelady wrote:
> 
> Hi, Leo:
> 
> On V3R2 (and I thought on earlier releases) *RQD is a
> valid option for the "default reply" on the ADDRPYLE
> command.
> 
> If you _do_ have a default value for this cmd, then
> remove it (RMVRPYLE) from the reply list.
> 
> If all of your job descriptions truly have *RQD spec-
> ified (I don't doubt you), then I am baffled.  I'd be
> tempted, just for the test, to submit an OPNQRYF, with
> INQMSGRPY(*RQD) specifically stated on the SBMJOB command,
> and see if the problem persists.  _OR_ you can put:
>    CHGJOB INQMSGRPY(*RQD)
> right in front of the OPNQRYF command.
> 
> If the problem persists then, I imagine it would either
> be an "undocumented feature," or it may be put in there
> by design.... but I cannot imagine why.
> 
> Since I'm not really "on" our AS/400 anymore, I can't go
> much further now than to advise.  I hope this is of some
> help.
> 
> Dennis



I just realized that when the 'OPNQRYF' is executed in interactive mode,
the message issued is: "CPA4259" which has a "Type: Inquiry"; while, in
batch, the same command gives me a "CPF427F" message. which is a
"Diagnostic message" only. 
Why would we get two different results for the same problem?
-- 

Leo Lefebvre
leo@tug.on.ca
Toronto Users Group for Midrange Systems
Ph: (416) 606-5960   ---   Fx: (416) 495-0100
                           
                            _/
                           _/
          _/          _/_/_/_/_/    _/_/_/
         _/          _/           _/    _/
        _/          _/          _/       _/
       _/          _/_/_/_/    _/       _/
      _/          _/          _/       _/
     _/          _/          _/       _/
    _/          _/           _/     _/
   _/_/_/_/_/  _/_/_/_/_/_/   _/_/_/
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.