TCP/IP Remote Printing

>>
I am trying to print through a Warp Server(WS) running netbios
and tcpip.  I can print from other machines to the printer
but not the AS/400.  I can telnet and ftp to the WS successfully
but cannot get the lpr command to work on the AS/400.  I am 
trying to get this to work interactively on the 400, before I
set up a remote passthru queue.  Any thoughts as to why this 
might NOT be working?  The physical printer name is IBM4039L and
it is on LPT1 ... I have tried every combination possible when
entering on the commandline as follows:
                                                       
 LPR RMTSYS(HOOD.AIMSLLC.COM) PRTQ(LPT1) FILE(QSYSPRT)
        MFRTYPMDL(*IBM4039HP)

       -or-

 LPR RMTSYS(HOOD.AIMSLLC.COM) PRTQ(IBM4039L) FILE(QSYSPRT)
        MFRTYPMDL(*IBM4039HP)

<<

I normally do not followup to my own posts, but this should
help others as well.  The problem that I was having, was that
my AS/400 was not listed in the hosts table (all others were,
but I had overlooked this problem).  I then issued an LPR
RMTSYS(*INTNETADR) PRTQ(IBM4039L) FILE(QSYSPRT) MFRTYPMDL(*IBM
4039HP) INETADDR(XXX.XXX.XXX.XXX) where XXX...XXX is the IP
address of the remote printq.  Once I made those minor changes,
it works like a charm.  I have been dealing with TCP/IP for
over 10 years, and it never ceases to amaze me how small things
can really mess up a perfectly good weekend!! <g>

-Bob-                                                                     
-- 
   Bob Angell, Principal - Sys. Engineer/Author/Consultant
   Applied Info & Mgnt Sys, 1238 Fenway Ave., SLC, UT 84102 
   v: 801-583-8544 e: aimsllc_AT_ibm_DOT_net

   "Had Mama Cass and Karen Carpenter shared that Ham sand-
   wich, they would both be with us today!"
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *