Re: ECS Line/Modem problem

Jerry Draper wrote:
> 
> >
> >     I wish to replace our IBM 5858-01 modems running at 2400 with modems
> >     running at 9600 on the ECS lines of both AS/400's (Model 300 & 310).
> >
> >     I have purchased two Hayes Optima 336 Business Modems which are
> >     synchronous capable.
> >
> >     I have changed the line speed and link speed parameters on the Line
> >     Description to 9600.
> >
> >     When I run SNDSRVRQS *TEST I receive message
> >     CPA5902 Controller QESCTL not contacted. Call out request failed.
> >
> >     Can anyone point me to where I am going wrong?
> 
> I recommend you return the Hayes modems because they cannot be configured
> from the front panel and do not have V.25bis autodial which is required for
> ECS lines.  I recommend the UDS V.3400 modems.
> 

I not only second Jerry.  I recommend the the V.3400 highly.  Buy it,
load the factory option set 9 from the front panel and you are set. 
However, DO NOT, I repeat DO NOT buy the V.34R (nearly same price but
V.34R cannot be configured from the front panel).  The V.3400 from
Motorola UDS is very robust and inexpensive (around $300) (hey for
synchronous communications you cant do any better.)

-- 
Thank You.

Regards

Dave Mahadevan.. mailto:mahadevan@fuse.net
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *