× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: TCP/IP to AS/400
  • From: Neil Palmer <npalmer@xxxxxxxxxxx>
  • Date: Fri, 16 May 1997 12:35:29 -0400
  • Organization: NxTrend Technology - Canada

Carl Galgano wrote:
> 
> >        If you don't want the QPADEVnnn names, you can simply rename the
> >devices.  We did this and also created more devices to ensure that we
> >weren't going to have any QPADEVnnn created.
> >
> >        If you create or rename, make sure the devices have the correct
> >type and model number.  We had a few that somehow got changed to the wrong
> >type, and then the CA95 couldn't change them back to the proper value for
> >some users, possibly due to authority problems or other unknown cause.  We
> >had to delete and re-create those devices with proper type.  We never found
> >out why some users had problems and others not since they were all in the
> >same group profile, but deleting and re-creating solved it permanently for
> >some also-unknown reason.  The symptom of the problem was that we had a few
> >programmers whose PCs refused to run the regular 5250 emulation but would
> >run properly with "Graphical Access".
> >
> 
> You may be able to rename the device descriptions, however, you can not
> determine which user gets which device description when they start a TELNET
> session.  This is similar to how virtual devices are assigned when using
> Display Station Pass Thru between 2 AS400s over SNA.
> 

Except that with STRPASTHR you can select a specific device:

STRPASTHR RMTLOCNAME(*CNNDEV)
          CNNDEV(REMOTE400)  
          VRTDEV(FRED01)       

-- 
...Neil Palmer                                      AS/400~~~~~      
...AS/400 Technical Specialist      ____________          ___  ~     
...NxTrend Technology - Canada      |OOOOOOOOOO| ________  o|__||=   
...Markham,  Ontario,   Canada      |__________|_|______|_|______)   
...Phone: (905) 731-9000  x238       oo      oo   oo  oo   OOOo=o\   
...mailto:npalmer@nxtrend.com    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.