Re: TCP/IP to AS/400

>        If you don't want the QPADEVnnn names, you can simply rename the
>devices.  We did this and also created more devices to ensure that we
>weren't going to have any QPADEVnnn created.
>
>        If you create or rename, make sure the devices have the correct
>type and model number.  We had a few that somehow got changed to the wrong
>type, and then the CA95 couldn't change them back to the proper value for
>some users, possibly due to authority problems or other unknown cause.  We
>had to delete and re-create those devices with proper type.  We never found
>out why some users had problems and others not since they were all in the
>same group profile, but deleting and re-creating solved it permanently for
>some also-unknown reason.  The symptom of the problem was that we had a few
>programmers whose PCs refused to run the regular 5250 emulation but would
>run properly with "Graphical Access". 
>

You may be able to rename the device descriptions, however, you can not
determine which user gets which device description when they start a TELNET
session.  This is similar to how virtual devices are assigned when using
Display Station Pass Thru between 2 AS400s over SNA.

Carl

>                                Best Regards,
>                                L. Paul Andralouis
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>* This is the Midrange System Mailing List!  To submit a new message,   *
>* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
>* this list send email to MAJORDOMO@midrange.com and specify            *
>* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
>* should be directed to the list owner / operator: david@midrange.com   *
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>
Carl J. Galgano
EDI Consulting Services, Inc.   
540 Powder Springs Street
Suite C19
Marietta, GA 30064
770-422-2995

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *