RE: Twinax Card and Win95

I agree, I have installed a zillion BOS cards and they work like a champ,
the first time.

Carl

At 01:54 PM 5/3/97 +0200, Wolfgang Bröker wrote:
>Jerry Draper schrub am Fri, 2 May 1997 11:09:58 -0700 (PDT):
>> This is a known problem with IBM/Clone twinax cards failing in 
>> high speed pentiums.  In every case where this is a problem, 
>> installing a Synapse "smart" microprocessor based card has solved 
>> the problem.  No IRQ, no DOS TSR, no shared RAM problems.
>
>I worked successfully with adapters from BOS in Pentium machines up 
>to 166 MHz (never tried with a 200 MHz processor). These adapters 
>also don't use an IRQ if run in their native mode. IBM register 
>compatible mode is supported as well. Look at http://www.bosusa.com.
>
>Gruß - Wolfgang (not affiliated with any twinax board manufacturer)
>
>-- 
>***  This message was swisstimed by sntp://bernina.ethz.ch  ***
>***                Sat, 03 May 1997 10:21 +0200                    ***
>
>
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>* This is the Midrange System Mailing List!  To submit a new message,   *
>* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
>* this list send email to MAJORDOMO@midrange.com and specify            *
>* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
>* should be directed to the list owner / operator: david@midrange.com   *
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>umidr
>
Carl J. Galgano
EDI Consulting Services, Inc.   
540 Powder Springs Street
Suite C19
Marietta, GA 30064
770-422-2995

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *