× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



I suspect you did populate everything correctly, but whereas TRDATA does
support a TW, OFFTRN does not and you need the IW/RW separately. During TW
on an IOR item the inspection is turned on, except when kept within the same
whs, but IW/RW cannot see this, since transactions are separated, hence the
problem. My suggestion: give the RW a reason "SCAN" and create a trigger on
IMHIST whenever SCAN is the reason, to go and look for the SLQNTY record and
update it (hoping IMHIST is written after SLQNTY, which I believe is the
case)

-----Original Message-----
From: mapics-l-bounces@xxxxxxxxxxxx [mailto:mapics-l-bounces@xxxxxxxxxxxx]
On Behalf Of sjones@xxxxxxxxxxxxxx
Sent: donderdag 1 november 2007 14:08
To: MAPICS ERP System Discussion
Subject: Re: [MAPICS-L] Offline TW (IW & RW) transactions

Nick:

We don't use the offline file to create inventory transactions, we just
populate TRDATA records. So I probably wont be much help. Whenever we
have noticed behavior that is different than when using the green-screens
it has always been due to us not populating a field or populating it
incorrectly. I would check that all the fields are populated correctly.

Steve




From:
Nick_Radich@xxxxxxxxxxxxxx
To:
mapics-l@xxxxxxxxxxxx
Date:
10/31/2007 04:29 PM
Subject:
[MAPICS-L] Offline TW (IW & RW) transactions



Hello everyone.

We are XAR6 and V4R5 of the OS.

We have created a scanning program to allow the Users to scan TW
transactions. This in turn creates an IW and RW transaction in the
Offline File.

The problem we are having is the User's don't like to use the scanners on
these transactions because the RW transaction that is created turns on the

Inspection Flag, and somebody else has to go in and "Inspect" it, before
Inventory will see it.

When they use the normal menu option to enter in a TW, the flag does not
get set on.

Does anyone know if there is a way around this?



Thanx,

Nick



Nick Radich
Sr. Programmer/Analyst
EPC Molding, Inc.
Direct (320) 679-6683
Toll free (800) 388-2155 ext. 6683
Fax (320) 679-4516
nick_radich@xxxxxxxxxxxxxx

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.