× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Try running outside of QShell, if at all possible, to see if the error
recurs.  (I suspect it will not.)

Up through V5R1, the 'java' command is a QSH "built-in" command (i.e. it
runs in the same QSH process that calls it), which can cause problems when
you run the 'java' command twice or more in one QSH session.

There are several possible problem scenarios...  As an example, consider
System.loadLibrary (the call to load a native method library).  Loading a
native method library involves activating a service program (*SRVPGM).
Everyone knows that when you activate a C or C++ *SRVPGM, its static
storage is initialized to zero.  However, when you run some 'java' code a
*second* time within a QShell, the service program is found by
System.loadLibrary to have already been activated, and so the static
storage is not re-initialized.   (FWIW, I would list this as THE prime
suspect in your failure scenario.)

Anyway, if you have a hard and fast requirement to operate from within the
QSH (rather than from Command Entry) you might consider the workaround of
writing a small 'wrapper' QSH script that does the actual call to the java
command.  Running a script in QSH forces the creation of a new process for
the script to use -- this should make the problem disappear.

FWIW, in V5R2 'java' is no longer a QSH built-in -- it always starts in a
new process -- so process-level resource issues like yours are moot.

HTH.

-blair

Blair Wyman -- iSeries JVM -- (507) 253-2891
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"It is a sobering thought that when Mozart was my age,
he had been dead for two years." -- Tom Lehrer



|---------+------------------------------>
|         |           "Jacob Koshy"      |
|         |           <koshy.jacob@xxxxxx|
|         |           com>               |
|         |           Sent by:           |
|         |           java400-l-bounces@x|
|         |           idrange.com        |
|         |                              |
|         |                              |
|         |           07/31/2003 11:22 AM|
|         |           Please respond to  |
|         |           Java Programming on|
|         |           and around the     |
|         |           iSeries / AS400    |
|         |                              |
|---------+------------------------------>
  
>-----------------------------------------------------------------------------------------------------------------------------|
  |                                                                             
                                                |
  |       To:       "Java Programming on and around the iSeries / AS400" 
<java400-l@xxxxxxxxxxxx>                               |
  |       cc:                                                                   
                                                |
  |       Subject:  RE: MQ + JMS + AS/400                                       
                                                |
  |                                                                             
                                                |
  
>-----------------------------------------------------------------------------------------------------------------------------|




When we executed our JMS programs we got fatal errors from 2nd time.
That is why we tested this MQIVP.

We tested it in bindings mode. We are aware that MQIVP is for base java.

Can u assist further?

Regards,
JK

-----Original Message-----
From: Gary L Peskin [mailto:garyp@xxxxxxxxxxxx]
Sent: Thursday, July 31, 2003 9:39 PM
To: 'Java Programming on and around the iSeries / AS400'
Subject: RE: MQ + JMS + AS/400


If you are using a client connection, rather than a bindings connection,
MQIVP will prompt you for various information interactively.  It looks
like someone may be using a client connection and pressed enter too soon
without supplying the queue manager name.  To assist further, we'd need
to see all of the prompts and responses together with the "Success:"
messages from MQIVP.  Also, please note that MQIVP checks only base
java, not JMS.

HTH,
Gary

> -----Original Message-----
> From: java400-l-bounces@xxxxxxxxxxxx
> [mailto:java400-l-bounces@xxxxxxxxxxxx] On Behalf Of Jacob Koshy
> Sent: Thursday, July 31, 2003 8:39 AM
> To: java400-l@xxxxxxxxxxxx
> Subject: MQ + JMS + AS/400
>
>
>
> Hi All
>
>  Thanks in advance for your help..
>
>
> Problem Statement
>
>
> We are trying to execute JMS programs in AS400 QShell.
>
> MQSeries 5.2 is installed.
> JDK 1.3.1
> JMS is applied
>
>
> We have to execute java program for MQ from QShell few times.
> we are getting error. we have doubted some environment
> problems. So we have executed the installation verification program.
>
> We are executing verification test for MQ installation from QShell.
>
> We are excecuting the MQIVP program supplied with MA88.
> (/qibm/proddata/mqm/java/samples/base)
>
> $ java MQIVP
>
>
> The program completes successfully.
>
>
> Again we are trying to execute the same program in the same Q
> Shell. we are getting the following error.
>
>
>
>  java MQIVP -trace 5
>
>
>
>
>
>
>
>  04:33:41 [1059669221454] Thread: Thread-0, Object:
> com.ibm.mq.MQQueueManager@  beb982d5 ==> MQManagedObject
> constructor() entry
>
>    04:33:41 [1059669221587] Thread: Thread-0, Object:
> com.ibm.mq.MQQueueManage
>   <mailto:r@xxxxxxxx> r@xxxxxxxx @(#)
> common/javabase/com/ibm/mq/MQManagedObject.java, java, j520,
>  j520-L010613  01/04/26 10:28:31
>
>  04:33:41 [1059669221591] Thread: Thread-0, Object:
> com.ibm.mq.MQQueueManager@  beb982d5 <== MQManagedObject
> constructor() exit
>
>  04:33:41 [1059669221592] Thread: Thread-0, Object:
> com.ibm.mq.MQQueueManager@  beb982d5 ==> MQQueueManager
> constructor (String,Hashtable)() entry
>
>    04:33:41 [1059669221592] Thread: Thread-0, Object:
> com.ibm.mq.MQQueueManage
>   <mailto:r@xxxxxxxx> r@xxxxxxxx
> common/javabase/com/ibm/mq/MQQueueManager.java, java, j520,
> j520-L  010720  01/07/20 16:27:50 @(#) 1.41.1.7
>
>    04:33:41 [1059669221597] Thread: Thread-0, Object:
> com.ibm.mq.MQQueueManage
>   <mailto:r@xxxxxxxx> r@xxxxxxxx ==> construct() entry
>
>      04:33:41 [1059669221605] Thread: Thread-0 ==>
> MQQueueManager::obtainBaseM  QQueueManager (Java 1.1 version() entry
>
>        04:33:41 [1059669221625] Thread: Thread-0, Object:
> com.ibm.mq.MQBinding
>   <mailto:sManagedConnectionFactoryJ11@xxxxxxxx>
> sManagedConnectionFactoryJ11@xxxxxxxx ==>
> MQBindingsManagedConnectionFactoryJ
>  11 constructor() entry
>
>        04:33:41 [1059669221629] Thread: Thread-0, Object:
> com.ibm.mq.MQBinding
>   <mailto:sManagedConnectionFactoryJ11@xxxxxxxx>
> sManagedConnectionFactoryJ11@xxxxxxxx <==
> MQBindingsManagedConnectionFactoryJ
>  11 constructor() exit
>
>        04:33:41 [1059669221635] Thread: Thread-0 ==>
> Uninitialized object::Bin  dingsConnectionRequestInfo
> constructor() entry
>
>
>
>        04:33:41 [1059669221651] Thread: Thread-0, Object:
> com.ibm.mq.BindingsC
>   <mailto:onnectionRequestInfo@x> onnectionRequestInfo@x <==
> BindingsConnectionRequestInfo constructor() exit
>        04:33:41 [1059669221665] Thread: Thread-0, Object:
> com.ibm.mq.MQSimpleC
>   <mailto:onnectionManager@xxxxxxxx> onnectionManager@xxxxxxxx ==>
> allocateConnection() entry
>          04:33:41 [1059669221674] Thread: Thread-0, Object:
> com.ibm.mq.Managed
>   <mailto:ConnectionStore@xxxxxxxx> ConnectionStore@xxxxxxxx ==>
> chooseOne() entry
>          04:33:41 [1059669221676] Thread: Thread-0, Object:
> com.ibm.mq.Managed
>   <mailto:ConnectionStore@xxxxxxxx> ConnectionStore@xxxxxxxx <==
> chooseOne() exit
>          04:33:41 [1059669221681] Thread: Thread-0, Object:
> com.ibm.mq.StoredM
>   <mailto:anagedConnection@xxxxxxxx> anagedConnection@xxxxxxxx ==>
> StoredManagedConnection constructor() entry
>            04:33:41 [1059669221697] Thread: Thread-0, Object:
> com.ibm.mq.MQBin
>   <mailto:dingsManagedConnectionFactoryJ11@xxxxxxxx>
> dingsManagedConnectionFactoryJ11@xxxxxxxx ==>
> _createManagedConnection() entr  y
>
>              04:33:41 [1059669221719] Thread: Thread-0,
> Object: com.ibm.mq.MQM  <mailto:anagedConnectionJ11@xxxxxxxx>
> anagedConnectionJ11@xxxxxxxx ==>
> MQManagedConnection constructor() entry
>               04:33:41 [1059669221750] Thread: Thread-0
> Class: MQSESSIONServe r getMQSESSION() - retrieving MQSESSION...
>
>               04:33:41 [1059669221758] Thread: Thread-0 ==>
> MQSESSION::getLib
> raryName() entry
>
>               04:33:41 [1059669221758] Thread: Thread-0 <==
> MQSESSION::getLib
> raryName() exit
>
>               04:33:41 [1059669221782] Thread: Thread-0,
> Object: com.ibm.mq.s  <mailto:erver.MQSESSION@xxxxxxxx>
> erver.MQSESSION@xxxxxxxx ==>
> setThreadAccess() entry
>                 04:33:41 [1059669221782] Thread: Thread-0 ==>
> MQSESSION::getL
> ibraryName() entry
>
>                 04:33:41 [1059669221782] Thread: Thread-0 <==
> MQSESSION::getL
> ibraryName() exit
>
>                 04:33:41 [1059669221782] Thread: Thread-0,
> Object: com.ibm.mq
>
>
>   <mailto:.server.MQSESSION@xxxxxxxx>
> .server.MQSESSION@xxxxxxxx Thread
> switch enabled
>                04:33:41 [1059669221782] Thread: Thread-0,
> Object: com.ibm.mq.s
>   <mailto:erver.MQSESSION@xxxxxxxx> erver.MQSESSION@xxxxxxxx <==
> setThreadAccess() exit
>                04:33:41 [1059669221817] Thread: Thread-0,
> Object: com.ibm.mq.s
>   <mailto:erver.MQSESSION@xxxxxxxx> erver.MQSESSION@xxxxxxxx ==>
> MQCONN() entry
>                  04:33:41 [1059669221817] Thread: Thread-0,
> Object: com.ibm.mq
>   <mailto:.server.MQSESSION@xxxxxxxx>
> .server.MQSESSION@xxxxxxxx
> common/javabase/com/ibm/mq/server/MQSESSION.java,
>  java, j520, j520-L010802.1 01/07/30 16:27:40 @(#) 1.29.1.4
>
>                  04:33:41 [1059669221817] Thread: Thread-0,
> Object: com.ibm.mq
>   <mailto:.server.MQSESSION@xxxxxxxx> .server.MQSESSION@xxxxxxxx Queue
> Manager = ''
>  FATAL ERROR in native method: Try to invoke an instance
> method as a static me  thod
>
>        com/ibm/mq/server/MQThread.run()V+0 (MQThread.java:981)
>
>  $
>
>
> Jacob Koshy
>
> E-Biz EAI Practice
>
> Wipro Technologies
>
> 475A, Old Mahabalipuram Road
>
> Shozhanganallur, India
>
> Ph: 91-44-24500200  x2027 (Work)
>
>                  98412 91396 (Mobile)
>
> email : koshy.jacob@xxxxxxxxx
>
>
>
>
>
> **************************Disclaimer**************************
> **********
>
> Information contained in this E-MAIL being proprietary to
> Wipro Limited is
> 'privileged' and 'confidential' and intended for use only by
> the individual  or entity to which it is addressed. You are
> notified that any use, copying
> or dissemination of the information contained in the E-MAIL
> in any manner
> whatsoever is strictly prohibited.
>
> **************************************************************
> *************
> _______________________________________________
> This is the Java Programming on and around the iSeries /
> AS400 (JAVA400-L) mailing list To post a message email:
> JAVA400-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change
> list options,
> visit: http://lists.midrange.com/mailman/listinfo/java400-l
> or email: JAVA400-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/java400-l.
>

_______________________________________________
This is the Java Programming on and around the iSeries / AS400
(JAVA400-L) mailing list
To post a message email: JAVA400-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/java400-l
or email: JAVA400-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/java400-l.


_______________________________________________
This is the Java Programming on and around the iSeries / AS400 (JAVA400-L)
mailing list
To post a message email: JAVA400-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/java400-l
or email: JAVA400-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/java400-l.






As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.