× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Did you check the NOTES.INI on both servers?  For example, let's pretend
that domMail is 10.10.1.1 and domApps is 10.10.1.2.  In the notes.ini for
domMail you should see
TCPIP_TcpIpAddress=0,10.10.1.1:1352
and in the notes.ini for domApps you should see
TCPIP_TcpIpAddress=0,10.10.1.2:1352

On your 400's host table entries you should see:
10.10.1.1      domMail.yournotesdomain.COM
10.10.1.2      domApps.yournotesdomain.COM

Server Doc, Internet Protocols, HTTP, Host name:
domMail.yournotesdomain.COM
Server Doc, Internet Protocols, HTTP, Bind to host name:  enabled

But most of this is for HTTP and it sounds like you have that beat into
submission.  There is an option in the server doc to pick different ports
for IIOP.  I hate using different ports - makes it nasty to configure
clients.

Rob Berendt
--
"They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety."
Benjamin Franklin



                    "Scott Johnson"
                    <sjohnson@highsmit       To:     DOMINO400@midrange.com
                    h.com>                   cc:
                    Sent by:                 Fax to:
                    domino400-admin@mi       Subject:     DIIOP on iSeries
                    drange.com


                    12/19/2001 02:03
                    PM
                    Please respond to
                    domino400







OS/400 V5R1
Domino 5.0.8

We have one iSeries box running 2 Domino servers(domMail and domApps).  I
am working with Java/Corba and seem to be running into a problem.  We have
separate ip addresses for the iseries box and one for each of the domino
servers.  When the domino servers start up, domMail is usually first so
when the DIIOP task starts it grabs the port (63148) and then sits idle.
When domApps starts, it starts the DIIOP task but stays at a Starting
status.  Thru Java/Corba, I can connect to domMail, but not domApps.  It
seems that when the first server starts it grabs the port and uses the ip
of the box not itself.  It seems to be a conflict on that port.  The port
for web (80) seems to be divided up between the two servers just fine.  Is
there some set-up that we missed somewhere to allow the two DIIOP servers
to run side by side?

--  THANKS
------------------------------------------------------
Scott P. Johnson
Applications Development Team Coordinator
Microcomputer Development Specialist
IBM Certified Specialist - AS/400 RPG Programmer
Highsmith Inc.
W5527 Hwy 106, PO BOX 800
Fort Atkinson, WI 53538-0800
TEL:  920-563-9571                FAX:  920-563-7395
sjohnson@highsmith.com
www.highsmith.com
------------------------------------------------------

_______________________________________________
This is the Lotus Domino on the iSeries / AS400 (DOMINO400) mailing list
To post a message email: DOMINO400@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/domino400
or email: DOMINO400-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/domino400.







As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.